ANNOUNCEMENTS
Dear Colleagues,
Thank you for attending the IX. Polymer Science and Technology Congress with International Participation.
You can download your certificate of attendance, the FINAL Book of Abstracts, or the conference photos by using the links below.
Dear Colleagues
The IX. Polymer Science and Technology Congress with International Participation, organized by the Polymer Science and Technology Association every two years, will be held in Ankara between 16 - 18 September 2024, hosted by the Middle East Technical University.
As the Republic of Türkiye leaves its centenary behind and enters its new century, we are organizing this prestigious congress with the aim of bringing together the leading names of polymer science and technology.
During the congress, leading researchers, academics, industry experts, and students will have the opportunity to exchange information on the latest polymer research, technologies, and innovations.
We maintain our confidence that our congress, where we aim to increase cooperation and discussion in the field of polymer science of the future, will enrich the experience of all participants and we hope that the IXth Congress will enrich the experience of all participants.
We are already very excited to host you in Ankara for the Polymer Science and Technology Congress 2024.
On behalf of the Organizing Committee
Prof. Dr. Ali ÇIRPAN
Chair of PolimerTR 2024
Final Program - 3 Days
16 Sep
Registration
Opening Session
Ali Çırpan - XI. Polymer 2024, Congress Chair
Welcome to PolymerTR 2024
Teoman Tinçer
Welcome to the growing PolymerTR community...
Ahmet Yozgatlıgil - Rector of METU/ODTÜ
Welcome to the Middle East Technical University
Sang Ouk Kim
Directed Nanoscale Assembly of Block Copolymers & Low-dimensional Graphene Based Materials for Post-AI Era
Coffee Break
Session 1-K
Chair: İrem Erel
Metin Ak
Photo- and electro-active conducting polymers: morphological, electrochemical and solar thermal fuel properties
Biopolymer-Based Protection Films Against Dendrite Growth on Zinc Anodes in Zinc Ion Batteries
Recep Yuksel
Inducing Neuronal Differentiation in Mesenchymal Stem Cells Using Plant-Oil-Based Hydrogels
Gulsah Sevimli
Parafin Kapsüllenmiş Polimetil Metakrilat-Polietilen Glikol Kopolimerlerinin Sentezi ve Faz Değişim Özelliğinin İncelenmesi
Elmas KIRTAY
Session 1-A
Chair: Erol Yıldırım
Light Controlled Discharging of Static Charges on Polymers
Bilge Baytekin
Phthalocyanines Into or Onto Polymers: Materials for PDT
Fabienne Dumoulin
Yavuz Eroğlu
Yeşil Dönüşümün Polimer Üretim ve Kullanımına Etkileri Ne Olur?
Aesthetic and Functional Life: Color Stabilization Strategies in ABS Polymers
Fırat Şahin
Session 1-B
Chair:
Enhancing Properties and Diverse Applications of Starch Hydrogels
DENİZ CEYLAN
Hypericum Perforatum Nano-Mikropartiküller ve Bunların Biyomedikal Uygulamaları
Sultan BÜTÜN ŞENGEL
A Novel Antibacterial Double-Layered Wound Dressing Material Loaded by Tigecycline via Electrospinning and Solvent Casting Methods
Şükran Melda Eskitoros Toğay
Sibel Altınok
Powder Polymers in Cementitious Systems: Innovative Applications and Strategic Importance
Session 1-C
Chair: Ahmet Önal
Development of Functional Cellulose Microspheres With Affinity Towards Bacterial Cells and Liposomes Containing Negatively Charged Phospholipids
Serhan Türkyılmaz
Electrospinning Parameter Optimization for Neat and POSS Filled PLA Nanofibers
Yelda Meyva Zeybek
In-Situ Self-Reinforcement of Amorphous PLA and Its Incorporation into PLA/PBAT Blends
M. Reza Nofar
Biodegradable Biocomposite Films Reinforced with Modified Microfibrillated Lignocellulose
Ferhat Yetiş
Bio-based Molecularly Imprinted Polymer Nanoparticles for Protein Recognition
Pinar Cakir Hatir
Photo time Smile :)))
Lunch
Session 2-K
Chair: Filiz Kuralay
Suna Timur
Harnessing the Multifunctionality of Bio-Decorated Polymers for the Point-of-Care Diagnostics
Development and Characterization of Alginate-Guar Gum Biopolymer Films
Nilay Kahya
Physically Cross-Linked Three Dimensional Gelatin/Poly Glyceryl Stearate-Based Nano Hydrogel Dressing to Promote Burn Wound Healing
Syed Shahabuddin
Thermoresponsive Poly(N,N’-dimethylacrylamide)-based Diblock Copolymer Worm Gels via RAFT Solution Polymerization: Synthesis, Characterization and Cell Biology Applications
Damla ULKER
The Combination of two-Dimensional TiS₂ Nanosheet and Conjugated Polymer Nanoparticles for Catechol Sensing
Dilara YENITERZI
Session 2-A
Chair: M. Reza Nofar
Effect of Hydroxyl-Terminated Polybutadiene (HTPB) Characteristics on Mechanical and Ballistic Performance of Composite Solid Rocket Propellants
Fatma Betül Taşkın
Modifiye Edilmiş Polimerik Katyon Değiştrici Reçine ile Maden Liç Çözeltilerinden Ca²⁺ ve Mg²⁺ İyonlarının Uzaklaştırılması
Emine Mete
Poliüretan Sektöründe Yeşil Dönüşümün Anahtarı; Biyopoliol İçerikli Sert Poliüretan Köpüklerin Hazırlanması, Uygulamaları ve Geleceği
EMRE BAŞTÜRK
Ozan Onur
Innovative Polymer Solutions and Additives: Akkim Kimya’s Contributions to all Industrial applications
Cihan Efe Kılıç
Innovative Polymer Solutions and Additives: Akkim Kimya’s Contributions to all Industrial applications
Session 2-B
Chair: Cemil Dizman
Çok Bileşenli Polimerizasyon Yöntemiyle Çeşitli Aromatik Politiyoürelerin Sentezi, Karakterizasyonu ve Uygulamaları
Fırat Ayan
Yeni Bir Tiyokzanton Bazlı Poli(ε-kaprolakton) Türevi Makrofotobaşlatıcının Sentezi ve Karakterizasyonu
Elif ÖZÇELİK KAZANCIOĞLU
Remzi Becer
Macromolecular Design Strategies using Poly(2-oxazoline)s
Development of Anti-Wear Biopolymeric Materials That Can Be Used in Fuel Filters and Investigation of Their Effects
Gökhan Ceyhan
Advanced SEC Analysis of Complex Polymer Architectures with Triple Detection
Tamoor Babur
Session 2-C
Chair: Metin Ak
Reactivity of Anhydride- and Epoxy-Based Chain Extender Mixtures with PET/PBT Blends: Rheological, Thermal, and Foaming Behaviors
Yavuz Akdevelioğlu
PA6/TPE Harmanlarının Tekrarlı Ekstrüzyon Sonrası Reolojik, Morfolojik ve Mekanik Özelliklerinin İncelenmesi: Multepposs Nanotaneciğinin Etkisi
Rumeysa Yıldırım
Effectiveness of Different Chain Modifiers in Upgrading the Thermoplastic Polyurethane Waste Materials
Simay Yanık
Mechanical, Thermal and Melt Properties of Polypropylene-g-Maleic Anhydride Compatibilized Polypropylene/Recycled Polyamide 6 Blends
Buket Pınarlı
Esnek Poliüretan Köpük Atıklarından Poliol Eldesi
YAPRAK AKSU
Chemical Recycling of Waste Plastics into Refinery and Petrochemical Feedstock
Ali Süerkan
Coffee Break
Session 3-K
Chair: Ayşe Eda Aksoy
Sezgin Gökçesular
Sustainability in the Tire Industry
Effect of Benzoylation Treatment on the Interface and Mechanical Properties of Hemp/Epoxy Biocomposites
Yekta Karaduman
Conjugated Polymer Nanoparticles for Sensing Applications
Sila Can Osmanoğulları
Jelatin Bazlı Hibrid Cerrahi Sızdırmazlık Malzemelerinin Sentezi, Karakterizasyonu ve Biyomedikal Uygulamaları
Ahmet Erdem
Application of Bio-Based Phenol-Formaldehyde Resins in Wood-Based Panels: Advances and Challenges
Ayda Göyçek Ünlü
Session 3-A
Chair: Hatice Duran Durmuş
Hierarchically Porous PolyHIPEs: Efficient Supports for Reusable Pt Catalysts in Alkene Hydrosilylation
Merve Süslükaya
Fabrication of Light-Responsive Smart Coatings with Switching Wettability
ESMA MUTLUTÜRK
Effects of Fluorinated Backbone Structure of Polyester on Surface Wettability of Coatings: Synthesis of Short-Length Perfluoroalkyl Based Polyesters
Tugba Demir Caliskan
Preparation of Polymer Nano- and Micro-Reactors for Enzymatic Reactions
Cemre Alemdar
Hakan Durmaz
Chlorodimethylsilane-Mediated Reductive Etherification Reaction: A Robust and Versatile Method for Polyether Synthesis
Session 3-B
Chair: Görkem Günbaş
The Effect of Different DAAM/ADH Ratios on the Coating Performance of Soft Core/Hard Shell Self-Crosslinking Acrylic Emulsions
Pınar Kasaplar Özkal
Lokalize İlaç Salımı için Yenilenebilir Poli(Menthide)-PEG Kopolimerlerinden Enjekte Edilebilir Isıya Duyarlı Hidrojellerin Geliştirilmesi
Mehmet Onur Arıcan
Yusuf Menceloğlu
CANCELLED due to a health concerns
Evaluating the Rheological, Mechanical, and Sustainability of NBR Materials Prepared by Using Different Plasticizers
Halit L Hosgun
Preparation and Characterization of Zn Doped TiO₂/MA-POSS Hybrid Material and Evaluation of Photocatalytic Activity
Sema ERDEMOĞLU
Session 3-C
Chair: Demet Asil Alptekin
Modeling Plastic Degradation Using Shock Compression and Reactive Molecular Dynamics
Tomasz Panczyk
Geri Dönüştürülmüş Silikon Kullanılarak Hazırlanan Elastomerlerin Mekanik Özelliklerinin İncelenmesi
Zühra Çınar Esin
Thermal Energy Storage Performances of N-octadecane@PVC Microencapsulated PCMs in Potential Building Materials
Cemil Alkan
Degradation Strategies for Commercial non-Hydrolyzable Polymers and Their Possible Future Applications
Hüseyin Cem Kılıçlar
Recycling and Re-Synthesis of Poly(ethylene terephthalate)
Serra Kori
Atık Esnek Poliüretan Köpükten Poliol Eldesi ve Tekrar Kullanımı
Gökhan Akın
Poster Session
Numerical modelling and CFD simulation of a Polymer Electrolyte Membrane (PEM) Fuel Cell
Nigar ALTINTAŞ
Bio-based New Benzoxazine Resins: Synthesis and Characterization
Berna Gündüz
Investigation of the Effects of Mica Modified with Silicone Resin on Water-Based Exterior Paints
MEHMET ÖZDEMİR
Functionalizable Polymer Brush Coated Iron Oxide Nanoparticles Using “Graft To” and “Graft From” Approaches
Busra Cengiz
Preparation and Characterization of Polyglycine Based Polymeric Micromotors
Elif Öztürk
Kompozit Karbon Küreleri: 4-Nitrofenolün Katalitik İndirgenme Çalışmalarında Katalizör Olarak Kullanımı
Hatice DEVECİ
Polymeric Micelles Functionalized via Supramolecular Interactions
Enfal Civril
Polymer Brush Coated Magnetic Nanoparticles: Fabrication and Functionalization for Cellular Targeting
Nora Ejderyan
Photothermally Triggered Protein Release from rGO-Embedded Hydrogels
Meltem Alkış
Development of Aerogel/Epoxy Composite Materials for Thermal Protection Systems
Ezgi Gözde Sezmen
Investigation of Corona Decay After Metalization of Biaxially Oriented Polypropylene (BOPP) Films
Özden Demircioğlu
Kablo Sektörüne Yönelik Silan Çapraz Bağlanabilir Polietilen (XLPE) Geliştirilmesi
Ufuk Çimen
Lateks Katkılı PHEMA Hidrojellerinin Hazırlanması ve Hazırlanan Hidrojellerin İlaç Salım Sisteminde Kullanılması
Beyza Erçin
Investigation the Influence of Using a Defoamer on HTPB-Based Propellant Properties
Sultan Taşkaya Aslan
Eco-Friendly Phytic Acid Based Organic-Inorganic Hybrid Coatings with Flame Retardant Features
Levent Babayiğit
Polikaprolakton Esaslı Sorbentlerin Organik Kökenli Kirliliklerin Gideriminde Kullanımı
Yağmur Çevir
Su Ürünleri İşleme Atıklarından Biyobozunur Polimerik Jel Gübre Eldesi ve Özelliklerinin Araştırılması
Buğrahan Özdemir
Coumarin-Based Fluorescent Magnetic-Silica Nanoparticles as Novel Adsorbents for Heavy Metal Removal from Water
Nurcan Karaca
Highly Selective Recovery of Heavy Metals from Electroless Nickel Plating Wastewater Using Magnetic Perlite-Based Adsorbent
Yasemin Balçık Tamer
Fonksiyonel Polidimetilsiloksanların Sentezi ve Poliüretan Köpük Oluşumundaki Etkilerinin İncelenmesi
Deniz Çakmaz
Developing Novel β-Cyclodextrin-Based Nanosponge as Nanocarrier of Hydroxyurea Anticancer Agent
Burcu Akar
The Effect of Functional Urethane Acrylates on the Adhesive Performance of Acrylic Latexes
Hilal Macit
Simultaneous Detection of Multi-Analytes Based on Copper Nanostructures-Poly(L-Lysine)-Reduced Graphene Oxide Modified Electrochemical Sensor
Gözde Aydoğdu Tığ
Antibacterial Properties of Bacteriophage Containing Multilayer Films
Tuna Gökçe
Kurşun Çekirdekli Kauçuk Deprem İzolatörü LRB
Emre Durmaz
Çoklu Uyaranlara Yanıt Verebilen (2-Dietilamino Etil Akrilamid) Esaslı Çapraz Bağlı Jellerin Sentezi ve Karakterizasyonu
Merve Torman Kayalar
Savunma Sektöründe Kullanılan Polimerlerin Yaşlandırma Testleri: Güvenilirlik ve Dayanıklılık Değerlendirmesi
Merve Kabaca
Yeni Nesil Yüksek Performanslı Ekolojik Furan Reçinesinin Geliştirilmesi
Ömer Ertabak
Preparation of Formaldehdye-Free Decolarant
Gökçe Kenar
Yeşil Çay Ekstresinden Çiçek Şekilli Nano Biyokatalizörlerin Sentezi ve Peroksidaz Benzeri Aktivitelerinin Fenol Türevlerinin Polimerleşmesinde İncelenmesi
Müge Mirioğlu
Synthesis and structural characterization of a novel modified poly(maleic anhydride-co-vinyl acetate)/folic acid conjugate
Gülderen KARAKUŞ
Redox-Responsive Hydrogels for Tunable Protein Release
Ruveyda Kilic Boz
Synthesis and Characterization of Castor Oil-based Thermoresponsive Hydrogels for Controlled Antibiotic Release
Dilara Dinç
Investigation of a Supercapacitor Electrode Based on Conductive Polymer, Carbon Material, and Metal Oxide
Merve Ünal
Yeni Nesil Akrilik Kauçukların Geleneksel Kauçuklara Göre Özelliklerinin Değerlendirilmesi
Derya Kaya
Electrochemical Drug Determination with Nanoparticles Decorated Polyarginine-Based Electrode
Mustafa Ali Güngör
Preparation of New Corrole-Based Conjugated Polymer for Designing Affinity Interfaces
Hilal KALKAN
Imide-Yne Click Polymerization: A New and Versatile Tool for The Toolbox of X-Yne Click Polymerization
Oguzhan Aslanturk
Poliester Sentezinde Kullanılabilen Laktit-Boc-Serin-OH Monomerinin Sentezi ve Poli(Laktit-Boc-Serin) Kopolimerinin Sentezinde Kullanılması
Onur Merdivenli
Flexible and Conductive Polymer Films Based on PDMS/PCz Composites
Işık İpek Avcı Yayla
Çok Yönlü Uygulamalar İçin Kazein Bazlı Kriyoboncuklar: Biyomedikal, Çevre ve Katalitik Uygulamaları
Sultan BÜTÜN ŞENGEL
Jelatin Temelli Hidrojel/Kriyogel Sentezi ve Uygulamaları
Nurperi BÜTÜN
Intratumoral Injection of Novel Drug-Loaded Starch Spheres into Pancreatic Cancer (PDAC) Tissue
Hakan AVCI
Yara İyileştirici Bir Malzeme Olarak Fonksiyonel Kompozit Hidrojel
Ayşegül ÖZBAL
Yağ-Su Ayrımı İçin Üstün Alev Geciktirici Performansa Sahip Süperhidrofobik Kaplama
Yasemin Ekiz
Curcumin-Loaded Cellulose Acetate Nanofibers Derived from Turmeric as Wound Dressing Material
Hilal Peker
Improving the Properties of Polyaspartic Ester Bio-Based Polyurea Coatings by Incorporating Silica and Titania
Sevilay Dural
Oda Şartlarında Kendi Kendine Çapraz Bağlanabilir Su Bazlı Tek Komponentli (1K) Akrilik Emülsiyonların Geliştirilmesi
Ömürcan Öztürk
Optimization of Coating Application Process for Rubber Weather-Strip by Using Minitab
Melike Nur Yıldırım
A Novel Photoresponsive Diazo Containing Polymer: Synthesis, Photophysical and Photochemical Properties
Yasemin Akdiş
Synthesis and Characterization of Bioprintable Oxidized Alginate/Chitosan Hydrogels
Nazlı Ece Varan Fakı
Revealing the SECrets of Polysaccharides Using SEC/GPC with Advanced Detection Methods
Tamoor Babur
Epokside Doğal Kauçuk (ENR) Esaslı Yüksek Performanslı Lastik Tamir Hamuru
Enes Kılıç
Investigation of the Effects of Recycled Powder HDPE on Fresh-Hardened Concrete with Polycarboxylate Based Admixture
Bahadır Mert Erduğan
Benzoditiophene Based Polymers for Ternary Organic Solar Cell Application
Pelin Oral
Drug Loaded Nanodroplets with Controlled Drug Release as Dual Functional Histotripsy Agent
Ibtisam Naser
Atık Polistiren Malzemelerden N-Oktadekan@PS Isı Depolama Amaçlı Mikrokapsüllerin Sentezlenmesi
Ömer Faruk Ensari
Improving the Transparency of Aqueous Solutions of High Purity Grade Carboxymethyl Cellulose (CMC)
Yusuf Baha Takma
Mekanik Direnci Yüksek ve Kimyasallara Karşı Deformasyona Dayanıklı Ateşleme Kablolarının Prototip Üretimi
Göktuğ Cenk Uysal
Study of Cold Plasma in Deposition and Surface Functionalization of Polyester-Derived Biocomposite Scaffolds Using Mass Spectrometry and XPS
Merve Beyaz
A Novel Conjugated Polymer-TiO2-Based Sensor to Detection of Butamirate Citrate
Selva Bilge
Synthesis of Bio-Based and Hybrid Acrylic Copolymers at Low Temperatures and Their Coatings
Üstün Utkan Acar
In-situ and Green Synthesis of PEDOT-Polydopamine Through Photoinduced Electron Transfer (PET) Reactions
Sena Ermiş
EPDM Kauçuk Esaslı Sünger Yapılı Kompozit Malzemelerin Üretimi
İsmail Kaşkaş
Sülfonil Radikalinin Kimyası
Elshan Nasseri
Utilization of Styrene as a HAT Sensitive Moiety in Poly(methyl methacrylate) for Photo Degradable Copolymers
Mina Katı
Synthesis and Characterization of Epoxy-based Coatings: Investigating Mechanical Properties, Corrosion Resistance, and Enhanced Hydrophobicity
Elif Keskin
Microfluidic vs Batch Synthesis of Fluorescent POSS Nanoparticles
Betül Kılınçlı
Mobilya/Dekorasyon Sektörüne Yönelik Fenol Formaldehit Reçinesine İkame Biyobazlı Kağıt Emprenye Reçinesi Geliştirilmesi
Cansu Kozbekci Sabah
İki Basamaklı Benzoxazine Sentezinde; Aşama Sürelerinin Termal ve Kimyasal Özelliklere Etkilerinin Tespit Edilmesi
Alper Emre Güvendik
Perlit ve Genişletilmiş Perlit İlavesi ile Etilen Propilen Dien Monomer (EPDM) Kauçuğunun Fiziksel ve Yanmazlık Özelliklerinin İncelenmesi
Ali Öteleş
Effect of Polymeric Additives on the Efficiency and Stability of n-i-p Structured Perovskite Solar Cells
Zeynep Gözükara Karabağ
Biyomedikal Uygulamalar İçin Agaroz Bazlı Antibakteriyel Kriyojellerin Sentezi ve Karakterizasyonu
Elif Beyza Eren
Development of Sustainable Bio Composites for Automotive, Aerospace, and Leisure Application
Yiğit ILGAZ
Development of Bisphenol-Free Innovative and Environmentally Friendly Chemicals for Textile Processes
İlker Erdoğan
Investigating the Potential Usage of Bio-based Oil from Algae in the Production of Thermoplastic Elastomer
Ezgi Berfin Çeper
PVA-Polysaccharide Hydrogels as Robust Wound Dressings for Oxytetracycline Release
Duygu Zabitler
Yenilenebilir Manyetik Biyokompozit ile Safranin-O Adsorpsiyonu
Devlet Yeter Karanfil
Effect of Silane Additive Ratio on the Properties of Polyurethane Coatings
İrem Elmas Kant
Optimum Conditions of Plasticizers Used in Wood-Based Pencil Paints
Orçun Balkaner
Synthesis of Biobased Monomers for the Waterborne Acrylic Binders to Provide Water Repellent Coating Without the Use of PFAS
Ayşegül Budak
Increase the Moisture Resistance of Polyamide 5,6 Compound by Chemical Additives
Özlem Ünal
Stiren ve Metil Akrilat İçin Silan-en Polimerizasyonunun DFT İncelenmesi
Moro Umar Zakaria
Preparation and Characterization of Biogels for Soft Tissue Engineering
Kerem Veral
Synthesis of Halogene Substituted Novel Quinoxaline-based Conjugated Polymers for Organic Solar Cell Aplications
Sevgi Aydın
Synthesis of Thiophene Π-Bridge Modified Benzodithiophene and Quinoxaline Based Conjugated Polymers for Organic Bulk Heterojunction Solar Cell Applications
Meltem Türkatar
Suda Çözünebilen Polimerler İçin HPLC ile Sodyum Klorür Analizi
Semih Şahan
Dual-Responsive Nanoplexes for Synergistic Combination Therapy Against Melanoma
Tugba Gencoglu Katmerlikaya
İç Organ Yaralarının İyileştirilmesi İçin Esnek Biyo-Yapışkan Olarak Fe+3 ile Çapraz Bağlanmış Foto-Çapraz Bağlanabilir Katekol Konjugat Hibrit Kompozit Hidrojellerin Geliştirilmesi
Dilara Küçük
Preparation of Macrophage-Targeted PLGA Nanoparticles for the Delivery of Vitamin E Derivatives to Treat Atherosclerosis
Deniz Göl
Design and Synthesis of a New Thiazolothiazole and Thienothiophene Containing Donor-Acceptor Type Conjugated Polymer for Organic Solar Cell Applications
Semih Can Çakmaktepe
Investigation of Electrokinetic and Antimicrobial Properties of Zn-Ferrite/Chitosan Composites
Mehmet Çabuk
Synthesis of Novel Oxadiazole-Containing Polymers for Organic Solar Cell Applications
Sedanur ŞAHİNASLAN
Pil Uygulamaları için Karboksimetil Selüloz Geliştirilmesi
Simge Uzunok
Pyrolytic recycling of waste elastomers
Şeyma Şevval Tuna
Preparation of structurally stable PEG 2000 phase change materials based on gluten biomaterial
Hilal Baş
Synthesis and Characterization of Chitosan Full-IPN Cryogels
Gürkan Durucu
Electrochemical Contribution of NiAl-LDHs to Gelatin Hydrogel Modified Electrode
Vildan Sanko
Recycling of Waste PMMA as an Optically Transparent Matrix
Erkan Aksoy
Synthesis And Characterization Of Cationic Surface Sizing Agent For Paper Recycling
Barış OKUYAN
Development of Binding System for Increasing Plywood Production Capacity
Başak Karagöllü
Development of Polypropylene Cups With Increased Thermal Resistance For Hot Applications
Volkan Sebil
Poli(N-Bütil Metakrilat) ve Poli(N,N-Dimetilaminoetil Metakrilat) İçeren Katyonik Kopolimerlerin Sentezi ve DNA ile Etkileşiminin İncelenmesi
İREM ALTINOK
Improvement of corrosion performance of titanium and its alloy with phytochemicals and surface coating
Turan Yanardağ
Siklodekstrin ile Çapraz Bağlanmış Supramoleküler Hidrojeller
S. N. Kirmic Cosgun
A Study on Enhancing Electromagnetic Shielding Properties of Semi-Integral Polyurethane via Spray Coating Method
Tuçe Fidan
Palladium/Polyhistidine-Based Electrodes for Electroanalytical Applications
Çağan Tomur
Welcome Cocktail
PLENARY & INVITED SPEAKERS
PLENARY SPEAKERS
Nikos Hadjichristidis
King Abdullah University of Science and Technology (KAUST)
Sang Ouk Kim
Korea Advanced Institute of Science and Technology (KAIST)
INVITED SPEAKERS
Metin Ak
Pamukkale University
Cemil Alkan
Tokat Gaziosmanpaşa University
Sibel Altınok
ORGANİK KİMYA Chief R&D and Polymer Technology Officer
Remzi Becer
University of Warwick
Vural Bütün
Eskişehir Osmangazi University
Atilla Cihaner
Atılım University
Pınar Çamurlu
Akdeniz University
Aslı Dal
IBA Powder Coatings
Mehmet Doğan
Erciyes University
Hakan Durmaz
İstanbul Technical University
Yavuz Eroğlu
PAGEV President, TOBB Plastics, Rubber and Composite Industry Assembly President, Board of Directors of EuPC
Sezgin Gökçesular
BRISA BRIDGESTONE
İrem Erel Göktepe
Middle East Technical University (METU)
Selmiye Alkan Gürsel
Sabancı University
Cihan Efe Kılıç
AKKİM KİMYA
Barış Kışkan
İstanbul Technical University
Sermet Koyuncu
Çanakkale Onsekiz Mart University
Filiz Kuralay
Hacettepe University
Yusuf Menceloğlu
Sabancı University
Ozan Onur
AKKİM KİMYA
Güralp Özkoç
İstinye University
Hatice Duran Durmuş
TOOB ETU
Turan Öztürk
İstanbul Technical University
Javid Rzayev
University at Buffalo, The State University of New York
Amitav Sanyal
Boğaziçi University
İlke Anaç Şakır
Gebze Technical University
Murat Şen
Hacettepe University
Yusuf Ali Tasti
SASA Polyester
Mehmet Atilla Taşdelen
Yalova University
Ümit Tayfun
Bartın University
Suna Timur
Ege University
Halil İbrahim Ünal
Gazi University
Samet Varol
University of Bologna
Ümit Hakan Yıldız
İzmir Institute of Technology
Pelin Erdoğan
PETLAS
Can Özlüer
PETLAS
SCIENTIFIC TOPICS
Instructions for Presenters
Oral Presentation:
- Familiarize yourself with the schedule: Check your presentation date, time, and hall.
- Your presentation should be in Microsoft PowerPoint format (.ppt or .pptx).
- Make sure images, visuals or videos are embedded in your PowerPoint file.
- Use standard fonts, sizes, and colors for clear viewing.
- Your presentation time is 15 minutes, including Q&A. Ideally, use no more than 20 slides.
- Give your presentation to the technical staff in the meeting room 2 sessions before you present.
- Before your session starts, introduce yourself to the chairperson.
Poster Presentation:
- Posters should be portrait and 70x100 cm in size. Printing responsibility is yours.
- Use clear fonts and visuals so they can be seen from a distance.
- It's a good idea to include: Polymer logo, title, names and affiliations of authors, introduction, methods, results, conclusion, references, and acknowledgment.
- Stand by your poster during your assigned time. Posters not presented will be removed from the abstract book.
- Take down your poster after your session, as we can't store them safely.
Registration & Fees
When to register and pay?
Your early registration is greatly appreciated as it helps us predict and manage the limited conference resources, ensuring a seamless welcome for you.
To ensure a smooth registration process, please follow these steps:
- Click on any of the 'Register Now' buttons located on this page. You'll be directed to the registration form. Fill in the required information in the registration form. Once done, proceed to submit the form.
- Upon successful registration, an automated email containing your login credentials will be sent to the email address provided.
- While immediate payment isn't mandatory upon registration, we recommend selecting the "Book now, Pay Later" option for preliminary booking. However, securing early bird registration fees is encouraged, considering the period-based pricing system we follow.
- Utilize your participant account to manage your attendance efficiently. From your account page, you can complete pending payments, download your invoice, update/edit your abstract, or track the abstract evaluation results.
- A special discount will be applied to Polymer Association Members. Please contact the organizing office.
We're here to make your registration process as seamless as possible. Should you encounter any issues or have inquiries, please don't hesitate to reach out to us via feryal@arber.com.tr.
IMPORTANT NOTICE:
All participants, including those attending for listening purposes, must register for the conference, as registration is mandatory to access the venue and sessions. Upon registering, you'll receive a confirmation email with access details. This email must be presented at the registration desk.
Important Deadlines
Abstract submission deadline: Closed (Open for Late Poster only)
Notification of acceptance: 15 July 2024
Author payment deadline: 19 July 2024
HOUSING
We have blocked rooms at the Guesthouse of METU for comfortable and affordable accommodation just 5 minutes walk to the conference venue; Kemal Kurdaş Congress Center.
We suggest you book and pay directly to the guest house, following the steps below:
- Book the room you will stay emailing the guest house including room type, check-in and check-out dates,
- You will receive an email about your booking within 24 hours,
- Make the total payment of your booking within 24 hours declaring "Your Name / Polimer-TR Congress"
Please be informed that METU is not able to provide you with any official document such as an invoice, expenditure document, etc.
Bank Account: IBAN: TR2600 0100 1537 0898 1749 5001 (this account only for the accommodation payment).
Account Beneficiary: ODTÜ Strateji Geliştirme Daire Başkanlığı
- Email your payment document to the email address of Guesthouse-16: yurt16@metu.edu.tr
All the rooms are well designed and furnished (like 3* hotel rooms). However, as it's a guest house (not a hotel) you have to bring your requirements such as a towel, hairdryer, paper, etc. There are also some shops near the guest house, where you can purchase such items.
For additional information, you can check the website below,
Guesthouse - 16: http://yurtlar.metu.edu.tr/tr/16-konukevi
ROOM TYPES & FEES
| Single Room with Bathroom (Per Person) | 706 TL |
| Twin Room with Bathroom (Per Person) | 669 TL |
| Twin Bunk Room with Bathroom (Per Person) | 476 TL |
| Triple Room with Bathroom (Per Person) | 471 TL |
Book Your Room @ Guesthouse-16
Email: yurt16@metu.edu.tr
Phone: 0312 210 4722
SPONSORS
Please click to download POLYMER Sponsor-exhibitor boothing instructions file.
Platinum Sponsors
Gold Sponsors
Silver Sponsors
Badge and Lanyard Sponsor
Notebook & Pen Sponsor
Bag Sponsor
Exhibitors
Supporters
Organizers
COMMITTEES
Organizing Committee
Prof. Dr. Levent Toppare
Prof. Dr. Ahmet M. Önal
Prof. Dr. İrem Erel Göktepe
Prof. Dr. Akın Akdağ
Prof. Dr. Ayşe Eda Aksoy
Assoc. Prof. Dr. Görkem Günbaş
Assoc. Prof. Dr. Hatice Duran Durmuş
Assoc. Prof. Dr. Serhan Türkyılmaz
Assoc. Prof. Dr. Özgür Bayer
Assist. Prof. Dr. Erol Yıldırım
Assist. Prof. Dr. Tarık Baytekin
Assist. Prof. Dr. Demet Asil Alptekin
Dr. Gönül Hızalan Özsoy
Research Assistant Dilara Gündoğdu
Research Assistant Oğuzhan Karakurt
Research Assistant İrem Kolay
Scientific Committee
Assoc. Prof. Dr. Dilek Alagöz, Çukurova University
Prof. Dr. Ayşe Zehra Aroğuz, İstanbul University - Cerrahpaşa
Prof. Dr. Hülya Arslan, Bülent Ecevit University
Prof. Dr. Yasemin Arslan Udum, Gazi University
Prof. Dr. Nergis Arsu, Yıldız Technical University
Prof. Dr. Murat Ateş, Namık Kemal University
Prof. Dr. Göknur Bayram, Middle East Technical University
Prof. Dr. Ayşe Bedeloğlu, BursaTechnical University
Prof. Dr. Umut Bulut, Acıbadem University
Prof. Dr. Engin Burgaz, Ondokuz Mayıs University
Assoc. Prof. Dr. Efkan Çatıker, Ordu University
Prof. Dr. Aydan Dağ, Bezmiâlem Foundation University
Prof. Dr. Mustafa Değirmenci, Harran University
Prof. Dr. Hüseyin Deligöz, İstanbul University - Cerrahpaşa
Prof. Dr. Gökçen Demirel, Ankara Hacı Bayram Veli University
Prof. Dr. Gökhan Demirel, Gazi University
Prof. Dr. Sibel Demirel, Kocaeli University
Assoc. Prof. Dr. Hatice Duran Durmuş, TOBB Economy and Technology University
Prof. Dr. Tarık Eren, Yıldız Technical University
Prof. Dr. Mustafa Ersöz, Selçuk University
Prof. Dr. Mustafa Gazi, Doğu Akdeniz University, TRNC
Assist. Prof. Dr. Özgül Gök, Hakkari University
Prof. Dr. Menemşe Gümüşderelioğlu, Hacettepe University
Assoc. Prof. Dr. Şerife Özdemir Hacıoğlu, İskenderun Technical University
Prof. Dr. Numan Hoda, Akdeniz University
Prof. Dr. Yasemin Işıkver, Sivas Cumhuriyet University
Assoc. Prof. Dr. Merve İçli Özkut, Ankara University
Assist. Prof. Dr. Tuğba Arzu Özal İldeniz, İstinye University
Assoc. Prof. Dr. Yasin Kanbur, Karabük University
Prof. Dr. Yunus Karataş, Ahi Evran University
Prof. Dr. Cengiz Kavaklı, Hacettepe University
Prof. Dr. Pınar Kavaklı, Hacettepe University
Prof. Dr. İsmet Kaya, Çanakkale Onsekiz Mart University
Prof. Dr. Nilhan Kayaman Apohan, Marmara University
Prof. Dr. Cevdet Kaynak, Middle East Technical University
Prof. Dr. Tonguç Özdemir, Mersin University
Prof. Dr. Necati Özkan , Middle East Technical University
Prof. Dr. Mehmet Saçak, Ankara University
Prof. Dr. Rana Sanyal, Boğaziçi University
Prof. Dr. Dursun Saraydın, Cumhuriyet University
Prof. Dr. Uğur Adnan Sevil, Hitit University
Prof. Dr. Sevil Savaşkan Yılmaz, Karadeniz Technical University
Prof. Dr. Seha Tirkeş, Atılım University
Prof. Dr. Mehmet Özgür Seydibeyoğlu, İzmir Kâtip Çelebi University
Assoc. Prof. Dr. Saniye Söylemez, Necmettin Erbakan University
Prof. Dr. Ertuğrul Şahmetlioğlu, Kayseri University
Prof. Dr. Bahire Filiz Şenkal, İstanbul Technical University
Prof. Dr. Binnur Temel, Bezmiâlem Vakıf University
Prof. Dr. Kezban Ulubayram, Hacettepe University
Prof. Dr. Ayşegül Uygun Öksüz, Süleyman Demirel University
Assoc. Prof. Dr. Elif Vargün, Muğla Sıtkı Koçman University
Prof. Dr. Hüseyin Bekir Yıldız, Bartın University
Prof. Dr. Yasemin Yüksel Durmaz, İstanbul Medipol University
SPONSORSHIP
We cordially invite you to become one of the esteemed sponsors of the Polymer 2024 Congress!
Your sponsorship means more than just financial support:
• Showcase your significant position in the industry by being a prominent part of this event, where leaders converge.
• Demonstrate your commitment to polymer technology and innovation, aligning your brand with the forefront of advancements.
• Today's competitive landscape demands more than mere visibility. Consolidate your relationships with key decision-makers while showcasing your values and distinctiveness.
• Engage with today's emerging scientists, who are tomorrow's decision-makers, in a rapidly evolving polymer field.
• In challenging economic times, highlighting your strength and support serves as a positive beacon for your brand. We believe that this congress is a great opportunity to expand the boundaries of academia-industry cooperation in the polymer field, together.
We eagerly await your presence and support of the Polymer 2024 Congress.
For sponsorship inquiries, please contact Arber Congress Inc. at feryal@arber.com.tr
METU Culture and Convention Center
Address: METU Culture and Congress Center, 06800 Çankaya/Ankara
How to get to METU Culture & Convention Center?
The A1 and A2 entrance gates of METU campus are 7 km away from the city center and they are nearby Eskişehir Highway. There are other entrance gates like A4, which is in the direction of 100. Yıl and A7, which is situated on the Bilkent way.
You can take metro line M2 directly to the ODTÜ metro station on campus. KKM is just 1.5km from station A1, with dolmus shuttle transport available.
It is possible to reach METU campus by METU district buses, EGO buses, minibuses and taxi. The most convenient of them is EGO buses since their service is most easily accessible and available. The operating hours and routes of some of the buses operating between the campus and various districts of the city are available from the links below:
District Buses
EGO Buses
Ring Buses (Ring Buses Tracking System)
Minibusses operating between Kızılay/Ulus/Ayrancı and METU Campus
Within the METU campus, a taxi service is available using the number 219 51 51 or 285 07 07.
For more SEE the METU transportation regulations page.
Middle East Technical University - METU
METU is a pioneer university at an international level, which transforms its region and the world.
METU is home to over 26,500+ students and 2,200+ academic staff working on a mission of attaining excellence in research, education, and public service for society, humanity, and nature by nurturing creative and critical thinking, innovation, and leadership within a framework of universal values.
Middle East Technical University excels in science and innovation - as demonstrated by recent honors, funding, and projects. Over the past 5 years, METU has received over 280 awards recognizing excellence across scientific endeavors. 58 new research grants have been secured enabling work on over 300 research projects - cooperatively and with leading agencies like TÜBİTAK. With achievements spanning from central research centers to international cooperatives, METU’s drive to transform understanding through borderless research continues.
Please click METU official website for more details...
Host City Ankara
Ankara, Turkey's capital, is a historic city with roots dating back to ancient civilizations. Formerly known as Ancyra and Angora, it served as the capital of Galatia and later the Roman province with the same name. Positioned in central Anatolia, Ankara's urban center houses 5.1 million people, making it Turkey's second-largest city. The historic center features the remnants of Ankara Castle, offering a glimpse into its diverse past.
An integral player in Turkish history, Ankara became the political center during the establishment of the Grand National Assembly in 1920 and assumed the role of the national capital in 1923. Beyond its governmental significance, Ankara is a thriving commercial and industrial hub, strategically located at the crossroads of Turkey's transportation networks. The city seamlessly blends its historical heritage with modern vitality, symbolizing resilience and progress in the heart of Turkey.
PREVIOUS CONFERENCES
Abstract Submission Guideline:
Abstracts should be submitted online through the MeetingHand Abstract Submission System, which we use to collect and manage registrations and abstracts for PolimerTR conferences. Meetinghand automatically applies the abstract template, but we'd like to provide more details for a seamless submission process:
1. Submission and Editing:
- The system automatically determines the format, including text type, length (min 100 - max 350 words), etc. - The abstract submission system allows editing, saving, and submitting abstracts for evaluation.
- Abstracts can be freely updated until the submission deadline. For post-deadline updates, please send an email via the 'Contact Organizer' link in your participant account (requires login).
2. Title, Presentation Type, and Scientific Topic:
- Please capitalize each word of the title carefully.
- The submitting (corresponding) author must specify the presentation type and the scientific topic for which the abstract is being submitted.
3. Authors:
- The author submitting the abstract is designated as the "Corresponding Author".
- The Corresponding Author must add and define the order of co-authors, select the presenting author, and provide affiliations and email addresses for all authors.
- Authors should be added separately.
- The system will automatically merge affiliations with author names. Please use copy/paste for affiliations to avoid misspellings.
- Rewrite the author's name if there are multiple affiliations.
4. Abstract Body:
- The main abstract text must be written in the designated section and can include basic formatting such as superscript and subscript.
- Copy-paste from doc and pdf documents is available.
- Please carefully review the copied and pasted abstracts in the preview section.
- Please double-check the formulas in the preview step.
- Do not include the title, authors, or affiliations in the abstract body text section (as it corrupts the review and publishing process).
5. Images, Charts, and Tables:
- It is preferable to avoid adding images, charts, or tables in the abstracts. However, if necessary, they can be added as an image only.
6. References and Keywords:
- References and keywords should be added in the separate fields provided, not in the main abstract text section.
- References should be cited in the abstract text.
We look forward to receiving your abstracts and appreciate your adherence to these guidelines to ensure a smooth submission process.